Руководство Пользователя Snapper Газонокосилка Lawn Mower [1/8 Страницы]

Snapper газонокосилка Lawn Mower

SET-UP INSTRUCTION & PRE-OPERATION CHECKLIST

SNAPPER 21" STEEL DECK COMMERCIAL RECYCLING WALK MOWERS

INTRODUCTION: The SNAPPER Walk Behind Mowers are shipped almost fully assembled and require minimal

set-up. Complete each of the following steps carefully. Review and complete each item as instructed on the

Pre-Operation checklist. The Snapper Product Registration card must be filled out and sent to Customer

Service department at Snapper when completed.

WARNING – DO NOT ATTEMPT TO START OR

OPERATE THIS UNIT UNTIL ALL ASSEMBLY

STEPS HAVE BEEN COMPLETED. SERIOUS

INJURY OR EQUIPMENT DAMAGE MAY RESULT.

HANDLE ASSEMBLY

STEP 1: Remove mower from shipping carton. These

mowers are manufactured with (4) 5/16-18 x 2” hex cap

screws, and (4) 5/16 bolt retainers that secure the

upper, middle handles and lower handle brackets

together for packaging purposes. This hardware will

have to be removed and discarded. See Figure 1.

REMOVE EXISTING HARDWARE

FIGURE 1

STEP 2: New hardware can be found in hardware bag.

Attach middle handle to lower handle brackets using

5/16-18 x 2” curved head bolts, installed from the inside

of handles as shown, and secure with 5/16 internal

tooth lock washers and hex nuts. Do Not tighten at this

time. See Figure 2.

STEP 3: Attach the upper handle assembly to the middle

handle using 5/16-18 x 1-1/2” curved head bolts,

installed from the inside of handles as shown, and

secure with 5/16 internal tooth lock washers and hex

nuts. Do Not tighten at this time. See Figure 3.

FIGURE 2

FIGURE 3

FIGURE 4

INSTRUCTION No. 7100374 (I.R. 1/11/2006)

TP 300-5113-IR-CW-N

UPPER

HANDLE

MIDDLE

HANDLE

5/16 BOLT

RETAINER

5/16 BOLT

RETAINER

5/16 X 1-1/2” MACHINE

SCREWS

5/16 X 2” HEX

HEAD CAP

SCREWS

MIDDLE

HANDLE

5/16 BOLT

RETAINER

LOWER

HANDLES

MIDDLE

HANDLE

LOWER

HANDLE

(Left Side)

5/16 X 2”

CURVED

HEAD BOLT

5/16 HEX

NUTS

5/16 LOCK

WASHERS

UPPER

HANDLE

MIDDLE

HANDLE

INTERNAL

TOOTH LOCK

WASHER

5/16 X 1-1/2”

CURVED

HEAD BOLTS

HEX NUT

LOWER HANDLE

BRACKET

LOOSEN

THREE NUTS

manualsocean.ru

Информация

Snapper газонокосилка 0-7001

Snapper газонокосилка 06125

Snapper газонокосилка 06124

Snapper газонокосилка 06006

Snapper газонокосилка 0

Snapper газонокосилка YZ16424BVE, YZ20484BVE

Snapper газонокосилка YT16D

Snapper газонокосилка 421615BVE

Snapper газонокосилка V211S

Snapper газонокосилка 265X

Snapper газонокосилка YT18H Series 4

Snapper газонокосилка RD1840, RD18S40

Snapper газонокосилка LT140H33DB

Snapper газонокосилка Legacy XL 2900

Snapper газонокосилка 1690082

manualsocean.ru

Информация