Siemens компьютерный диск 611-D Руководство

PDF Руководства
1154 Страницы Английский

Siemens компьютерный диск 611-D
Страницы
От
1154
6 NC Machine Data (NC MD), NC Setting Data (NC SD) 09.01
6.6.1 General MD bits (general bits)
7 6 5 4 3 2 1 0
Bit No.
NC MD
5185
negative positive
Exact stop
on change
from G64 to
G00
Angle offset for
thread cutting
(as from SW 5.7)
Default value: 0
Active: NC Stop
Bit 0
V
S
G64 G00
V
S
G64 G00
NC generates NC generates
"coarse" exact stop "coarse" exact stop
V
S
G64 G00
V
S
G64 G00
Bit 0 = 0
Bit 0 = 1 If a path is traversed in an NC block with G64 and traversing continued in the
next block with G00, the NC generates feedrate reduction with coarse exact
stop at the end of the block.
Bit 6 and 7 (should only be used for very slow spindle speeds)
The G92 angle is always calculated in one direction, irrespective of the direction of rotation.
This direction can be set via machine data:
Bit 6=1 Angle G92 A.. always calculated in the positive spindle direction
Bit 7=1 Angle G92 A.. always calculated in the negative spindle direction
Note:
Only one direction can be selected.
Default value: Both bits=0 Angle is calculated in the actual direction of rotation.
6–120 ©
Siemens AG 1992 All Rights Reserved 6FC5197- AA50
SINUMERIK 840C (IA)
Связанные руководства для Siemens компьютерный диск 611-D
sony
Siemens компьютерный диск sony

Для компьютерный диск (38 Страницы)
300
Siemens компьютерный диск 300

Для компьютерный диск (64 Страницы)
840C
Siemens компьютерный диск 840C

Для компьютерный диск (1154 Страницы)