Руководство Пользователя Siemens Вентиляционный Колпак Lc479650Uc [6/20 Страницы]

Siemens вентиляционный колпак LC479650UC

English 4

Light Bulb Replacement Place fingers behind lens and push out from behind.

Figure 3: Light Bulb Replacement

Remove the damaged light bulb and replace. Snap lens back into place.

Do not use cooktop while hood is disassembled, to ensure adequate ventilation.

Troubleshooting Before calling service, check the possible explanations below. If these solutions

fail, call service. Please have your serial number and model number ready. They

are located on the underside of the hood on the left side.

Table 1: Troubleshooting

Problem Possible Explanations

Noise During Operation Some noise is normal due to vibration and air

movement. Excessive noise indicates one of

the following:

• Ductwork is too small/undersized.

• Ductwork is too large/oversized.

• Ductwork is loose.

• Transition is too small or too loose.

• Screws in trim parts, etc. are loose.

Noise When Not Operating Backflow flap on outside of duct wall cap

moves with the wind.

Fan Motor Does Not Work • Power supply to hood is not sufficient.

• Wires are not completely connected.

Lights Under Hood Hum A slight hum is normal.

Operation of Hood Trips

Breaker

• Wiring is not correct.

• Circuit is not correct.